July 12

Water Restoration in St Charles

By Kevin Finn

July 12, 2016

fix water damage, water damage, water damage repair

How to Fix Water Damage – Due To Water Line Break or Toilet Overflow

Do you need to call a professional for water restoration in St Charles?

Water damage can be a homeowner’s nightmare if not handled promptly and skillfully. The damage may result from a broken faucet, a leaking pipe, a toilet overflow or a foundation problem. Often, this may come as an emergency and if you don’t know what to do or where to find an expert in water restoration in St. Charles, a small leak can easily become a lake.

But before you contact a professional for help, you can attempt to handle some of these emergencies. Here are the tricks to help you troubleshoot a toilet overflow or a water line break.

What to Do When Your Water Line Breaks

Pipes may break because of freezing, rust, age or damage. How do you know a water line is broken? Well, depending on the location of your piping, you may notice the wall, ceiling or garden is sodden. You may also notice green plants growing near the pipe.

In extreme cases, you will spot a geyser splashing up at an enormous force. Once you notice any of these indicators, you need to act fast before the problem worsens and attracts the attention of the entire neighborhood.

So how do you handle it?

1. Stop the leak: Ensure you know the location of the shut-off valve to your main water supply. The valve is typically found inside or close to the meter box. You may need a tee-handle tool for the valve.

If you can’t see the valve there, you should check under the sink where the main water lines enter the household. Besides, you may want to run the faucets, flush all toilets and switch off the water heater to drain away excess water from the plumbing system.

2. If the break occurs near exposed power lines or any other electrical outlet, move away from the area and turn off the power to the house quickly. When water and power mix, the outcome can be dangerous.

3. Get a strip of rubber and wrap it on the burst section of the pipe. Clamp the wrap using a hose clamp, C-clamp or pipe-sleeve clamp.

4. This being a temporary repair, contact an expert responsible for water restoration in St. Charles.

Steps to Stop a Toilet Overflow

Other than a broken water line, a toilet can overflow. According to a study by IBHS, each incident of toilet failure can cost over $5,500 in repairs. Luckily, you can do something to stop the damage such costly damages.

1. Turn off the toilet’s water supply. To do this, use the
knob located below the tank, near the toilet’s base.water restoration in st charles

2. Adjust the float. If the overflow doesn’t emanate from a blockage, the best way to save the situation would be to raise or lower the float to the required bowl fill level.

3. Don’t flush it. If the toilet is clogged, flushing it won’t be a solution. It’ll only worsen the situation.

4. Contact a professional plumber to address the issue.

5. Call the provider of water restoration in St. Charles to safely clean up any water damage resulting from the incident.

The next time your toilet overflows or the water line breaks, consult this guide to save your home from costly water damages. If these plumbing issues and several others overwhelm you contact us anytime for a reliable and long-term solution.

Schedule an Estimate or Call Now