How to Determine If Your House Has Mold
Mold removal in St Louis is a serious issue. The heat and humidity of summer in St Louis is the perfect environment for mold growth. Are you aware that mold manifestation at your workplace or home can cause you severe allergies and illness? In addition, it can cause severe damage to your property and depreciate it in the long run. Property owners in St Louis should seek professional services immediately they see signs of mold on their property. Professionals for mold removal in St Louis employ sophisticated equipment to completely destroy the mold and prevent its return.
Mold is a microorganism (fungus) that grows in moist places. In homes and properties, mold manifestation is associated with high moisture levels. Other than moisture, mold requires enough supply of oxygen, darkness, warmth and a source of food to flourish. In the right conditions, mold can grow with 48 hours.
How to Tell Whether Your Home is Infested with Mold
According to Joslyn in an article on Mold Blogger, below are signs that you have a mold problem in your property:
1. Physical manifestation of mold. You could see small or large patches of mold. At times, you may confuse mold for dirt or soot. Hence, if you aren’t sure, investigate or consult with a professional in mold removal in St Louis. Remember, not all mold is dark-colored. Some is white and thread like. Be on the lookout for that too.
2. Foul smell. Mold causes a pungent smell in your property. Even if you have not seen any mold, investigate the source of the foul smell. At times, mold hides behind wall papers, in wall cracks or in dark corner. Thus, you may not see it quickly.
3. Health symptoms. At times, you may not see the mold but you may experience symptoms such as aggravated asthma, nasal congestion, itchy eyes, persistent coughing and sneezing.
While these symptoms may be caused by other reasons, it is common that they manifest when you are indoors and subside once you leave the property.
6 Easy Ways to Prevent Mold Manifestation in Your Home
Heidi Hill in the Mother Nature Network points out that the key to preventing mold manifestation in your home is to deal with the root cause. In this case, limiting moisture accumulation is the genesis of mold growth. Below are measures you can take to limit moisture accumulation.
1. Limit condensation by ensuring the temperatures in doors are warm. You could achieve this by insulating surfaces or using heaters.
2. Promote proper ventilation. Keep windows open when it is hot and close windows in the cold season. You can use fans and air conditioners to promote air circulation.
3. Seal sources of leakages and spills. If water spills on the floor or wall, dry it completely. Work with a professional plumber to repair leaking pipes and roofs.
4. If flooding occurs, work with a professional water damage restoration company to prevent future flooding and removal all accumulated water.
5. Open windows and curtains during the hot season to allow UV rays to enter your home. Exposure to UV light inhibits mold growth and promotes wet places to dry.
6. Regularly clean you carpet and air duct system. Regular cleaning promotes proper ventilation and prevents moisture accumulation.
Causes of Moisture Accumulation
How do you know whether there is a moisture problem in your property? Moisture problem may manifest in form of water stains, discolored walls, peeling paint, bubbles beneath paint, bowed or warped walls or simply if your walls and floor feel dump. Home Guide points out the following causes of excess moisture in your home.
- Humidity: Property built in climatically humid environments such as in the coast is prone to mold manifestation. Using a humidifier in your home can also raise humidity level.
- Poor ventilation: Poor ventilation causes stuffiness and moisture accumulation causing high humidity in your home. Poor ventilation also means that wet surfaces dry up more slowly. It is therefore important that your kitchen and bathroom are well-ventilated.
- Condensation: You can tell there is condensation in your house if you see vapor on the roofs, walls and glass surfaces within the house. Condensation is a sign that your home has high moisture content.
- Flooding: If you’ve experienced flooding in the recent past, chances are some places within the house didn’t completely dry up. The basement is the most notorious for withholding water from a flood. Also, if your property is constructed in a dump and marshy area, water may seep from the ground through the floor.
- Water leaks and spills: Moisture could accumulate around leaking roofs and pipes or in the areas where the water drops.
Varying Mold Species
According to the CDC, there exists thousands of mold species. Of the hundred thousand species, only 16 species are considered toxic as they release a substance known as mycotoxin that is toxic to human beings. Examples of the strains of toxic mold include: Aspergillus, Penicillium, Stachybotrys and Trichoderma.
Many people assume that all black or dark colored molds are toxic. Contrary to this common belief, not all dark mold is toxic. St Louis mold removal companies offer mold testing services to determine whether or not the strain of mold in your property is toxic.
Toxic mold cause allergies and illness commonly referred to as the sick building syndrome that results from poor indoor air quality which originates from mold manifestation or dust.
Mold Removal and Remediation
If mold growth in your home is minimal, you can opt for DIY yourself mold removal. You don’t have to go far to find mold removal products. Most of them are household products you use on a daily basis including bleach, baking soda, vinegar, detergents, borax, grapefruit extract and tea tree oil are the solution. Other mold removal products include ammonia and hydrogen peroxide.
On the other hand, when you have a large mold problem or if you suspect the mold is toxic, the Black Mold Website recommends that you work with a professional and reliable profession specializing in mold removal in St Louis. Professionals use the most effective technology to remove mold. They have the equipment to determine whether the strain of mold in your home is toxic.
Acute mold growth can cost your health, and that of your employees or family. When left to grow, mold can cause damage to your property, carpet, walls, pipes and roof, consequently costing you a lot financially. Don’t wait until things get out of hand. Seek professional help as early as possible.
St. Louis Cleaning and Restoration has sophisticated equipment for mold remediation. If you are looking to hire reliable professional services for mold removal in St Louis, contact us today for a detailed consultation.